Monday, April 7, 2014

Being Mechanical



I am not by nature mechanically inclined. My father is. Even now, at nearly 90 years old, he can fix or take almost anything apart, and generally get it back together again. And he has no fear about attempting projects. He's a WWII vet, and I think a lot of the guys from that era learned how to take things apart and put them back together very easily. Maybe technology and mechanical skills were easier then. And maybe survival depended more upon those skills.

I did not learn as much about fixing things while growing up. My dad, like I said, is good at those things, but not a very good teacher. He tended to just fix things himself without much demonstration.

Over the years I picked up just enough knowledge about fixing or maintaining things to be dangerous. With step-by-step instructions and YouTube videos, I can often get through a project. But I lack the understanding about how things work. And I think that's the key to how people like my father, and my brother as well, are able to tackle projects. They don't need every single possible detail, because their brains can fill in the gaps. I'm missing that, to a certain extent. I don't mean to imply that it's a genetic or inherent thing. I just never learned enough of the science of machines to build up that understanding about how things work.

But I did learn a bit about bicycle maintenance and repair when I was a kid. After spending almost a year saving up the money to buy my Raleigh Grand Prix in 10th grade, I had a significant investment that needed to be protected. So I read books from the library and studied and tinkered and got a fair idea about how to clean and repack bearings, adjust a derailleur or change a brake cable.

Over the next twenty or thirty years I didn't do much bike maintenance. Or riding. And bicycle technology has changed, and I'm often confused. Some of the new parts and technologies on my new bikes are far simpler to fix or adjust, and allow far greater fine tuning than my old bikes. But I am easily confused about whether I have a part which is essentially a cartridge to be pitched and replaced.

This weekend I completely disassembled the front brake on my 1952 Raleigh Sport. I took photos of every step, carefully laid the parts out in order, more photos, then cleaned each piece. Then I reassembled it all. The operation was a success. And now I understand how it all works. It's very rewarding to me.

I sometimes wonder what I will do with these bicycles that I have cleaned and restored. I can't ride them all. I think it's the satisfaction of knowing how it works, of mastering something that has been my lifelong weakness. Don't get me wrong, I like riding bikes. But I also enjoy taking them apart and putting them back together just for the sake of learning.

When it comes to fixing things, including bikes, I'm often fearful of starting. What if it takes a long time to get this fixed? What if I mess it up and can't fix it? What if I lose a part? It's another reason I have a number of bikes -- if one breaks down, I can always switch to another. But the more I work on bikes, the more I'm able to overcome this fear.

My father never fears this failure. Just turn off the water, cut into the pipe, jump right in. I hope I'm becoming more like him.

Monday, March 10, 2014

A pair of vintage Raleigh Sports!


I took quite a road trip with my wife this past weekend. We live near Edwardsville, Illinois, outside St. Louis. We drove almost four hours up to Hamilton, Illinois, near Keokuk, Iowa to see a couple of old Raleigh bicycles for sale by a local teacher there named Chad. I “rescued” two bikes: a 1952 Raleigh Sport three-speed in complete condition, including owner’s manual and tools, and a 1961 Raleigh Sport. Both will make fun projects, depending upon how far I want to go with them.

So I have much to consider regarding whether to just do a good cleanup and get them in riding shape, or do a restore of some sort, or what? The 1952 has a full chaincase, which I've always wanted. But it's also a 21" frame, and I think the 23" frame on the 1961 would be a better choice for a "keeper."

Along the way we also saw an eagle, lots of hawks, deer and other critters. We also did a very quick run up to drive through and see the Nauvoo historic area and the temple. It was a fascinating area, and another real surprise was the beautiful river road between Hamilton and Nauvoo. The road is just feet away from the Mississippi River, which along this whole route is frozen solid. Volunteers at the Nauvoo Visitor’s Center told us that the river has around 12 inches of ice this year. It was odd seeing logs and brush lying on top of the ice all over the river.

Monday, March 3, 2014

Sunny Day Soldier

I was going to write a new posting for this blog. But something came up, and then I didn't, and before long I'd gotten out of the habit. This happens to me a lot!

One thing that I noticed was that I have a lot more to contribute to this blog when I'm riding regularly. And this has been the winter of no riding! I still see other people out riding, commuters all bundled up and a few weekend groups. But with ice and snow, I'm out of the saddle.

I got in quite a few rides up through December, but I think I've only ridden once since then. That was in the end of February when I finally got in a 21 miler near home. But no regular riding, and I'm suffering from it. Gaining weight. Eating poorly. Not taking advantage a couple of times when I might have been uncomfortable but could have ridden a bit.

So I've decided to try a different ploy: I'm going to write anyway. Gonna post something to keep myself interested in cycling until the weather allows me to get out there. Rather than letting the cycling inspire my writing, I'll let my writing inspire my cycling.

I had one bicycle project in my mind all year that I never got around to, and I think it's going to wait a bit longer because I want to do it right. I've built up a couple of bikes just to use up the parts I had lying around. But now I have a specific bike that I want to build, and to do it right requires starting from a good base frame. I'm looking for a nice 70s - 80s road bike, lugged steel frame, like a decent Raleigh or Fuji or something. I'd really like a quality metal, like Reynolds 531 double-butted tubing or better, in a 58cm or 23" frame size. Horizontal dropouts. I want to turn it into a nice "sportster" bike.

My plan is to do an upscale version of the Raleigh 3-speed Sportster bike. I'm thinking an 8-speed Shimano Nexus internal geared hub, Nitto mustache handlebars, a nice sprung Brooks saddle. Hammered fenders, a saddle bag, preferably hub-style generator lighting.

I've seen a few bikes that would make good subjects, but I can't seem to pull the trigger. I'm feeling a bit guilty about having too many bikes right now. So I guess my first task should be to try to sell or give a couple away to make room for a new project.

Friday, June 14, 2013

First 50-miler of the year



Jones Bike Loop H-Bar

A week or so ago I changed out the handlebars on the 2011 Specialized Sirrus Elite. My intention was to dump the straight bar, which I found uncomfortable both due to reach and due to lack of hand positions. Since my goal this year is to get more comfortable in order to do some longer rides, I knew I needed to either deal with neck and shoulder pain from the road bike or get more comfortable on the hybrid bike.

On Saturday I decided to give it a good test, and I did the longest ride I've done in probably two years. I did 51 miles, all along the Madison County trail system. At first I thought this was going to be impossible because tornadoes in the area had brought down many trees and power lines along the trails. But MCT was very effective in getting everything cleaned up and open. So I started early at the parking lot on Wanda Road near South Roxana, and rode into Edwardsville, then along the Nature trail to Horseshoe Lake park, and on out to Madison, Illinois, where the trail effectively ends. Then back, looping through Collinsville and Maryville before returning to Edwardsville and back to the trail head at Wanda.

My first thought at finishing the ride was that I could have ridden 50 more! I'm elated at how successful the new handlebars are at meeting my needs. I'm sure I'll have lots of rough rides and in time I may find that I need to do more tweaking. But after years of experimenting, I really feel like I've got a bike that works for me! And I've tried a lot of things to get to this point.

Next up: taping the handlebars. The Specialized Body Glove ergonomic grips are really good, and I find that I am most comfortable without gloves. But I need some cushioning and cover for the top part of the bar. So I'll be putting that on next weekend.

* * *


Later the same week I did a 13 mile ride one afternoon after work. It was extremely windy. Was this even the same bike? I really struggled. I wondered if I would have done better on the road bike in dealing with the wind. Makes me wonder how bike tourists are able to do those long days into the wind, day after day sometimes.

Tuesday, June 4, 2013

Converting the Specialized Sirrus to Jones Loop H-Bars

Jones Bike Loop H-Bar

Sometime back I posted about my discomfort with the straight handlebar on my Specialized Sirrus hybrid bike. I experience problems with my neck and shoulders as well as my hands and wrists with this setup, and began researching alternative handlebars.

Raleigh DL-1 with shellacked cork grips


About the same time I started doing a bit more riding on my old 1974 Raleigh Tourist DL-1 with the swept back handlebars and the traditional "sit up and beg" posture. I found it comfortable for the majority of my riding, but too limiting for longer rides. But it did make me want to be able to sit up a little higher, not craning my neck so much. I'm much more interested in looking at the scenery than in trying to go faster.

I also think that the straight bar creates a problem for me because it of the length of my reach. There's almost no variability to your posture with a straight bar. You're stuck with the same reach all the time. Plus, I feel like my wrists want a bit of a curve back rather than having to hold them at a straight angle. To me, it feels a bit unnatural. And after two years of trying this style of handlebar, I think I should have adapted to it if I'm ever going to.

I finally settled on an alternative handlebar made by Jeff Jones Bicycles. The handlebar is called the Jones H-Bar. It comes in two models, a Loop H-Bar and a Cut H-Bar. I chose the Loop Bar because, according to the web site, "Shimano and SRAM under-bar trigger-shifters won't work" on the Cut bar. It also appears to me that the loop bar sweeps back further, which is part of what I'm trying to accomplish.



The combination of the loop and the swept back bars provides a lot of different hand positions. I'm also able to use my Body Glove ergonomic grips with this bar, which I like.

I got the bar on Friday and began installing it on Saturday, but ran into the problem of needing to replace the cables -- my existing cables and housing were too short to fit the new bar. And that really complicated things, because the Specialized Sirrus has internally routed cables. I've never dealt with that. After talking to the folks at the bike shop, they convinced me that changing cables in a bike with internal routing was beyond my abilities.

So I ended up taking the bike in to have them install the handlebars and do the setup. It turned out to cost a lot more than I wanted to spend, and I'm not too happy about it. Never say never, they say. And don't burn your bridges behind you. But I don't think I'll be using that bike shop much anymore unless I'm completely out of alternatives. I already do most of my own maintenance and repairs, and I will learn how to change out the internally routed cables the next time it needs to be done.

Specialized Sirrus Elite with Jones Loop H-Bar


I finally got in a couple of test rides on the bike and I am happy overall with the new setup. The bars are not swept back quite as far as I'd imagined, and my hands and wrists still had discomfort. But I had plenty of options for changing my hand positions, so that more than compensates. And I'm surprised at how you can get into a kind of "aero" position much more effectively than I'd have guessed.

The weight and balance of the bike is a little different, I feel, but I should soon adapt to that. Hopefully these will be the handlebars that get me through my first century ride. Whether it's a metric century (100 kilometers) or 100 mile century, we will wait and see!

Here's a link showing a video/animation of the many hand positions and variations using the Jones H-Bars: http://www.jonesbikes.com/images/stories/document-images/hbar_positions_anim.gif

Thursday, May 16, 2013

Cork Grips and Shellac

[caption id="attachment_71" align="aligncenter" width="558" caption="Raleigh DL-1 with shellacked cork grips"][/caption]

This past week I decided to follow the trend I’ve seen on some vintage bike blogs, notably on Velo Orange and on Lovely Bike, of shellacking my cork grips. Really, nothing to it. Just pulled the grips off the bike before they had a chance to get dirty and grimy, and put a couple of coats of amber shellac on them, letting each coat dry for around 30 minutes to an hour between coats.

If there was anything the least bit challenging about doing this, it was finding a can of amber shellac. I’d paid a grand total of $6.00 for the grips. When I finally found the shellac, I paid almost $14 for a one-quart can at Menard’s. I have enough shellac now to last the rest of my life.

It’s a great look, I think, and I took a 15 mile ride on Sunday to try things out. I didn’t notice any real difference in the texture or comfort of the grips as a result of the shellac, so that’s a good thing.

Now I’m looking at pictures of bikes with burlap twine that’s been wound around various parts of the bike and then shellacked. Perhaps because I have this huge can of shellac hanging around, I’m pretty tempted to use it up. We’ll see if I go completely bonkers. In the case of bicycle adornments, sometimes less is more.

I will say that the natural next step is going to be adding a Brooks B-67 honey colored saddle.

The B-66 is the usual choice. It was one of the two usual choices for Raleigh bikes of this era. It fits on a straight seat post. But it lacks adjustability. And that’s something I think is really necessary with most Brooks saddles. At least for me, the Brooks saddle is the most comfortable thing around, but only if you can get it set up at exactly the correct tilt. I prefer a two-bolt seat post, so I’ve got one on order. I’ll make sure that it fits okay, then order a B-67, which fits on modern style seat posts.



Once that’s done, about the only other thing I am considering is to find, or build, some kind of saddle bag support. As seen in this photo, my saddle bag is almost hanging down to the rear mud guard (or fender), and the leather straps are starting to strain a bit.

Thursday, May 9, 2013

1970s Three-Speed Schwinn Project



The Schwinn three-speed “bike build” turned into the most involved project I’ve ever attempted. It began with the idea that I could simply clean up and tune up an old bike that had belonged to my family. My dad bought it at a flea market for my mom to ride, but I’m not sure she ever did. It was in a shed, then in the bushes. Years went by, in the sun and rain, and that didn’t help it much.

One day I noticed that it had a Sturmey-Archer SC3 hub, and I was intrigued with the idea of getting the bike working again. It’s a three-speed hub with a coaster brake. I decided to either re-purpose the hub or fix up the bike. Or something.

While things looked pretty good, as I got cleaning it up I discovered one rusted out problem area after another. It was beginning to look like the hub was about all that was really good about the bike. I found a bent spot in the frame. I found that the seat post and the stem were both seized. One pedal was rusted and seized. The rims were terribly rusted.



So I decided the frame was toast. I probably could have salvaged it, but knowing that it was just another ‘70s gas pipe steel Schwinn frame, I wasn’t going to stick money into it. For $10 (plus $30 for shipping!) I bought a men’s 70s Schwinn Speedster frame.

Then I discovered that the front wheel was rusted through. I had one more old bike lying out in the yard, and as luck would have it, it had 26x1-3/8 wheels as well, and it wasn’t a bike I had any interest in saving. So I pulled that wheel into service for this project. It was turning into a true Franken-bike, with parts from at least three bikes on it.

I salvaged some pedals. One of the original pedals was good, the other was rusted and wouldn’t spin. Since they were not serviceable pedals, I rooted around and found a matching pedal from another old bike that looked right. So that was the fourth bike that donated.

I had replaced the seat post from the Murray bike I rebuilt over the winter, and it had the same style of seat post as this bike, so that made parts from five different bikes.

I finally had to start buying parts. I needed all new cables, a new chain, a new 3-speed trigger shifter, a new stem, new rim strips, tubes and tires. I needed new head cups, cones and bearings. Same for the bottom bracket.

I put it all together while waiting for the tires to arrive. Here’s a photo of it as of this week:



I’m not sure I can live with a stem that long! But I won’t know until I get everything put together and tires on it and take it for a test ride. I have another bike that would be happy to swap with it, a single speed cruiser that would look fine with high handlebars.

The tires finally arrived. I did the front wheel first, since it’s a little easier to get on and off the bike right now. Everything worked great.

Then I tried to mount the back tire. No go! I had run across this issue before, and it’s hard to figure out. Schwinn had its own proprietary 26” bike wheel size that was different from other manufacturers’ 26” wheel. The front wheel worked fine, using a conventional 26x1-3/8 tire. But the back wheel, the Schwinn wheel, is 7 mm larger. So I’ve had to order a special S7 Schwinn tire for it. The tires are by the same manufacturer and have the same style, but it bugs my sense of symmetry that the two wheels will be a different size and use different size tires.

Now to wait for the new tire. In the meantime, I can replace the front fender and start cleaning rust off the back fender and the rear rack.